WELCOME TO Hongkong NKF Machinery Co.,Limited. English | Spanish

taper roller bearings

taper roller bearings
Author :Admin | Publish Date:2013-05-27 08:54:04
High accuracy pressed steel cage controls roller position resulting in low heat generation and reduced wear propertiesSingle Row [taper roller bearings] .These bearings are capable of taking high radial loads and also axial loads in one direction.Double Row Taper Roller BearingsThese bearings are capable of taking high radial loads and also axial loads in two directions.


Capable of taking high radial loads and axial loads in a single direction, NSK taper roller bearings are also available in two and four row versions to support axial loads in either direction.  Optimised designs can be supplied with high strength cages and, for arduous applications, in a range of advanced special materials.Timken offers the most extensive line of tapered roller bearings available anywhere in the world.  

 
Tapered roller bearings are uniquely designed to manage both thrust and radial loads on rotating shafts and in housings. We manufacture nearly 26,000 tapered roller bearing combinations – in single, double and four-row tapered roller bearing configurations. Customized geometries and engineered surfaces can be applied to these tapered roller bearings to further enhance performance in demanding applications.

 
Tapered roller bearings consist of four interdependent components: the cone, or inner ring; the cup, or outer ring; the tapered rollers, or rolling elements; and the cage, or roller retainer. The taper angles allow the bearing to handle a combination of radial and thrust loads. The steeper the cup angle, the greater the ability of the tapered roller bearing to handle thrust loads. 


The most basic and widely used tapered roller bearing, the single-row tapered roller bearing consists of the cone assembly and the cup. It is usually fitted as one of an opposing pair. During equipment assembly, single-row tapered roller skf bearings can be set to the required clearance or preload condition to optimize performance.


Double- or two-row tapered roller bearings feature double cups and two single cones. Double- or two-row tapered roller bearings are available in a variety of configurations for general industrial and automotive applications.


Four-row tapered roller bearings combine the inherent high-load, radial/thrust capacity and direct/indirect mounting variables of tapered roller bearings into assemblies of maximum load rating in minimum space.


Tapered roller bearings are angular contact iko bearings comprised of separate components (cones and cups), facilitating installation. By design they are suitable for combined loading. They can sustain very high loads (axial load in one direction) and tolerate slight misalignment.

BRING SKF RMS 20            (2 1/2 X 5 1/2 X 1 1/4) 
BRING SKF RMS 22            (2 3/4 X 6 1/4 X 1 3/8) 
BRING SKF RMS 28            (3 1/2 X 8 1/8 X 1 3/4) 

Contact Us

TEL:00852-54978621
FAX:00852-54979628
Email:sales@dbearings.com
Add:UNIT 04,7/F BRIGHT WAY TOWER,NO 33 MONG KOK ROAD,KL
WhatsApp:8618112377009

ina information lists

Copyright © 2014 Hongkong NKF Machinery Co.,Limited. All rights reserved. TEL:00852-54978621 FAX:00852-54979628 Email:sales@dbearings.com